NORDCOAT 6 is an outstanding corrosion and water-resistant surface coating that can be used on steel and a wide variety of other substrates. Two coats are recommended for most industrial applications.

Nordcoat 6
 

NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistanct coating which can be used on steel and a wide variety of other substrates.

Nordcoat 2
 

PS 1 gives a smooth finish to surfaces whilst protecting them from general acids and higher levels of chlorine.
 
PS 1

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.
 
Nordtile

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Our specially designed DEEP POUR GROUT is the perfect reinforcer for all heavy-duty machinery foundations. Not only can this Grout repair foundations but it can also be used as a damper when subjected to high-volume vibrations.

FAST SET GROUT set up stronger than concrete, self-levelling and is ideal for grouting new machinery or replacing old grout which has chipped or broken out.

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistant coating which can be used on steel and a wide variety of other substrates.

Nordcoat 2
 

NORDWEAR 5 ACID has excellent acid resistant and wear properties together with resilience and impact strength. It has specifically been designed for both waterborne slurries and pneumatic conveyancing.

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.
 
Nordcoat 6

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Our specially designed DEEP POUR GROUT is the perfect reinforcer for all heavy-duty machinery foundations. Not only can this Grout repair foundations but it can also be used as a damper when subjected to high-volume vibrations.

FAST SET GROUT set up stronger than concrete, self-levelling and is ideal for grouting new machinery or replacing old grout which has chipped or broken out.

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Our specially designed DEEP POUR GROUT is the perfect reinforcer for all heavy-duty machinery foundations. Not only can this Grout repair foundations but it can also be used as a damper when subjected to high-volume vibrations.

FAST SET GROUT set up stronger than concrete, self-levelling and is ideal for grouting new machinery or replacing old grout which has chipped or broken out.

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.
 

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Exterior:

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Our specially designed DEEP POUR GROUT is the perfect reinforcer for all heavy-duty machinery foundations. Not only can this Grout repair foundations but it can also be used as a damper when subjected to high-volume vibrations.

FAST SET GROUT set up stronger than concrete, self-levelling and is ideal for grouting new machinery or replacing old grout which has chipped or broken out.

Our specially designed DEEP POUR GROUT is the perfect reinforcer for all heavy-duty machinery foundations. Not only can this Grout repair foundations but it can also be used as a damper when subjected to high-volume vibrations.

FAST SET GROUT set up stronger than concrete, self-levelling and is ideal for grouting new machinery or replacing old grout which has chipped or broken out.

Our specially designed DEEP POUR GROUT is the perfect reinforcer for all heavy-duty machinery foundations. Not only can this Grout repair foundations but it can also be used as a damper when subjected to high-volume vibrations.

FAST SET GROUT set up stronger than concrete, self-levelling and is ideal for grouting new machinery or replacing old grout which has chipped or broken out.

STANDARD BACKING is tough, resilient and ideal for Gold, Copper and Low Strength Ores Cone Crushers (5 foot Crushers), Primary Gyratory Crushers, Rotating Mills, Pulverizes and other heavy reduction machinery.

Standard Backing
 
STEEL TROWEL MIX is an excellent material for fast low-cost repairs to steel, iron or other ferrous casting. Once hardened, it  can be machined, drilled tapped or filed just like steel. It does not sag and can be applied horizontally, vertically or on overhead surfaces.

Steel Trowel Mix
 
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
 
FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.
 
Fixwear

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
 
FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

Fixwear
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 

NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.
 
Nordtile

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 

NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
 

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 

NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
NOERDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
Exterior

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Nordcoat 6
 

STANDARD BACKING is tough, resilient and ideal for Gold, Copper and Low Strength Ores Cone Crushers (5 foot Crushers), Primary Gyratory Crushers, Rotating Mills, Pulverizes and other heavy reduction machinery.

Standard Backing
 
STEEL TROWEL MIX is an excellent material for fast low-cost repairs to steel, iron or other ferrous casting. Once hardened, it  can be machined, drilled tapped or filed just like steel. It does not sag and can be applied horizontally, vertically or on overhead surfaces.

Steel Trowel Mix
 
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDCOAT 6 is an outstanding corrosion and water-resistant coating that can be used on steel and a wide variety of other substrates.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDTILE is a co-polymer trowelable monolithic paste with excellent wear properties, resilience, high impact strength and chemical resistance.

Nordtile
 

HI-PERFORMANCE BACKING is NORDBAK’s most world-renowned Backing for both 5ft and 7ft Crushers. Hi-Performance can also be used in Large Gyratory Crushers and ensures minimal downtime and maintenance cost savings.

STANDARD BACKING is tough, resilient and ideal for Gold, Copper and Low Strength Ores Cone Crushers (5 foot Crushers), Primary Gyratory Crushers, Rotating Mills, Pulverizes and other heavy reduction machinery.

NORDBAK SUPERBAK BACKING materials are tough, resilient and ideal for Heavy Reduction Machinery and Crushing Operations.

NORDBAK® MULTIBAK BACKING

Pipes

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
Exterior

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Nordcoat 6
FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

Fixwear
 
Concrete Dams

Grouts are designed for the reinforcing or repairing of all heavy machinery foundations and offer unique advantages in their strength. One hundred percent (100%) solids with no shrinkage.

Grouts
 

TROWEL MIX eliminates the need for dismantling the mill or removing the grinding charge and can easily be place is any area of a mill where backing material is required. Trowel Mix serves to secure liner bolts in their holes.

Trowel Mix
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

Fixwear
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
Exterior

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Hi-Tech Wearing Compound Products

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
 
Exterior

NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistanct coating which can be used on steel and a wide variety of other substrates.

Nordcoat 2
 
NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Nordcoat 6
 
NORDCOAT 7 ACID is an acid and chemical environment surface protective coating.

Nordcoat 7 Acid
 
Bund Areas

PS 1 gives a smooth finish to surfaces whilst protecting them from general acids and higher levels of chlorine.

Hi-Tech Wearing Compound Products

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Exterior

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Nordcoat 6
 
GROUTS are designed for the reinforcing or repairing of all heavy machinery foundations and offer unique advantages in their strength. One hundred percent (100%) solids with no shrinkage.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
 
NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistanct coating which can be used on steel and a wide variety of other substrates.

Nordcoat 2
 

NORDCOAT 7 ACID is an acid and chemical environment surface protective coating.

Nordcoat 7 Acid
 

Grouts are designed for the reinforcing or repairing of all heavy machinery foundations and offer unique advantages in their strength. One hundred percent (100%) solids with no shrinkage.

Grouts
 

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Nordcoat 6
 

Grouts

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
 

NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistanct coating which can be used on steel and a wide variety of other substrates.

Nordcoat 2
 

NORDCOAT 7 ACID is an acid and chemical environment surface protective coating.

Nordcoat 7 Acid
 
Exterior

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Nordcoat 6
 

Exterior

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Nordcoat 6
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 

HI-PERFORMANCE BACKING is NORDBAK’s most world-renowned Backing for both 5ft and 7ft Crushers. Hi-Performance can also be used in Large Gyratory Crushers and ensures minimal downtime and maintenance cost savings.

Hi-Performance Backing
 
STANDARD BACKING is tough, resilient and ideal for Gold, Copper and Low Strength Ores Cone Crushers (5 foot Crushers), Primary Gyratory Crushers, Rotating Mills, Pulverizes and other heavy reduction machinery.

Standard Backing
 
STEEL TROWEL MIX is an excellent material for fast low-cost repairs to steel, iron or other ferrous casting. Once hardened, it  can be machined, drilled tapped or filed just like steel. It does not sag and can be applied horizontally, vertically or on overhead surfaces.

Steel Trowel Mix
 
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
STEEL STICKS – Works like putty – Stick like Glue. This excellent epoxy adheres to damp surface and cures under water. You can mold it to any shape, drill, saw, tap, file or paint it after the material has cured.

Steel Stick
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE is a co-polymer trowelable monolithic paste with excellent wear properties, resilience, high impact strength and chemical resistance.

Hi-Impact Pulley is designed primarily for relining pulleys. At normal room temperature (25°C), curing is complete in 6 – 8 hours.

Hi-Impact Pulley
 

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

Fixwear
 

HI-PERFORMANCE BACKING is NORDBAK’s most world-renowned Backing for both 5ft and 7ft Crushers. Hi-Performance can also be used in Large Gyratory Crushers and ensures minimal downtime and maintenance cost savings.

Hi-Performance Backing
 

STANDARD BACKING is tough, resilient and ideal for Gold, Copper and Low Strength Ores Cone Crushers (5 foot Crushers), Primary Gyratory Crushers, Rotating Mills, Pulverizes and other heavy reduction machinery.

Standard Backing
 

GROUTS are designed for the reinforcing or repairing of all heavy machinery foundations and offer unique advantages in their strength. One hundred percent (100%) solids with no shrinkage.

Grouts
 

LOCKING COMPOUND is a high-temperature and high-impact material for locking inner and outer eccentric bushes in Symons Cone Crushers.

Locking Compound
 

Hi-Tech Wearing Compound

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDWEAR 5 ACID contains fillers with exceptional abrasive, chemical and corrosion resistance. Suitable for both waterborne slurries and pneumatic conveyancing.

Exterior

NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistanct coating which can be used on steel and a wide variety of other substrates.

Bund Areas

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 

FIXWEAR was designed primarily for patching and relining pump casings. Will bond to all types of wear metal with proper surface cleaning.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 

NORDCOAT 6 is an outstanding corrosion and water-resistant surface coating that can be used on steel and a wide variety of other substrates. Two coats are recommended for most industrial applications.

Nordcoat 6
 

PS 1 gives a smooth finish to surfaces whilst protecting them from general acids and higher levels of chlorine.

PS 1
 

Bund Areas

Our specially designed DEEP POUR GROUT is the perfect reinforcer for all heavy-duty machinery foundations. Not only can this Grout repair foundations but it can also be used as a damper when subjected to high-volume vibrations.

Deep Pour Grout
 

FAST SET GROUT set up stronger than concrete, self-levelling and is ideal for grouting new machinery or replacing old grout which has chipped or broken out.

Fast Set Grout
 

NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistanct coating which can be used on steel and a wide variety of other substrates.

Nordcoat 2
 

NORDCOAT 7 ACID is an outstanding corrosion, acid and water-resistant coating that can be used on steel and a wide variety of other substrates. A two-part 100% solids co-polymer coating that gives a maximum coating thickness in a one-coat application.

Nordcoat 7 Acid
 

NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistant coating which can be used on steel and a wide variety of other substrates.

 
NORDWEAR 5 ACID has excellent acid resistant and wear properties together with resilience and impact strength. It has specifically been designed for both waterborne slurries and pneumatic conveyancing.

NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Nordcoat 6
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
NORDWEAR 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 
NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
 
NORDCOAT 6 is an outstanding corrosion and water-resistant coating which can used on steel, as well as a wide variety of other substrates.

Nordcoat 6
 
NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistanct coating which can be used on steel and a wide variety of other substrates.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
 
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordwear 5
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
Nordtile was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

 
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

NORDTILE was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
 

NORDCOAT 2 is a heavy duty, corrosion, acid and wear resistance coating which can be used on steel and a wide variety of other substrates.

Nordcoat 2
 

STEEL TROWEL MIX is an excellent material for fast low-cost repairs to steel, iron or other ferrous casting. Once hardened, it can be machined, drilled tapped or filed just like steel. It does not sag and can be applied horizontally, vertically or on overhead surfaces.

Steel Trowel Mix
 

STEEL STICKS are an epoxy compound filled with steel with unlimited uses for general repairs. Adheres to damp surfaces and cures under water. Use as putty or an adhesive. No measuring or mess, simply cut off what you need. Chemical and corrosion resistant. Can be used on a number of different types of materials.

Steel Sticks
 

STANDARD BACKING is tough, resilient and ideal for Gold, Copper and Low Strength Ores Cone Crushers (5 foot Crushers), Primary Gyratory Crushers, Rotating Mills, Pulverizes and other heavy reduction machinery.

Standard Backing
 
STEEL TROWEL MIX is an excellent material for fast low-cost repairs to steel, iron or other ferrous casting. Once hardened, it  can be machined, drilled tapped or filed just like steel. It does not sag and can be applied horizontally, vertically or on overhead surfaces.

Steel Trowel Mix
 

NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.

Nordtile was design to have excellent wear properties together with Resilience, High Impact Strength and Chemical Resistance. It can be applied seamlessly on new equipment or as patch repair on worn areas with minimum downtime.

Nordtile
 
Nordwear 8 has been designed specifically for Pump Casings, Chutes and high wear areas and is suitable for both waterborne slurries and pneumatic conveyancing. Nordwear 8 offers High Impact Strength, Resilience and Chemical Resistance.

Nordwear 8
 

PRIMARY BACKING “THE ULTIMATE IN BACKING” can be used in Primary Crushers with a 120 MPA. This impressive Backing will guarantee an extended life span for your Primary Crushers.

HI-PERFORMANCE BACKING is NORDBAK’s most world-renowned Backing for both 5ft and 7ft Crushers. Hi-Performance can also be used in Large Gyratory Crushers and ensures minimal downtime and maintenance cost savings.

Our specially designed DEEP POUR GROUT is the perfect reinforcer for all heavy-duty machinery foundations. Not only can this Grout repair foundations but it can also be used as a damper when subjected to high-volume vibrations.

FAST SET GROUT set up stronger than concrete, self-levelling and is ideal for grouting new machinery or replacing old grout which has chipped or broken out.

STEEL TROWEL MIX is an excellent material for fast low-cost repairs to steel, iron or other ferrous casting. Once hardened, it  can be machined, drilled tapped or filed just like steel. It does not sag and can be applied horizontally, vertically or on overhead surfaces.

Our specially designed DEEP POUR GROUT is the perfect reinforcer for all heavy-duty machinery foundations. Not only can this Grout repair foundations but it can also be used as a damper when subjected to high-volume vibrations.

Deep Pour Grout can not only be used for Jaw Crusher but on a wide variety of machines:

• Pulverizers
• Hammermills
• Large Pumps
• Bridge seals and rail approaches
• Diesel or gas engines
• Compressors
• Generators
• Outboard bearings
• Punch presses
• Jolt machines

You can see how this popup was set up in our step-by-step guide: https://wppopupmaker.com/guides/auto-opening-announcement-popups/