+27-11-824-1640 support@nordbak.co.za

Epoxy Grouts

Grouts are designed for the reinforcing or repairing of all heavy machinery foundations and offer unique advantages in their strength. One hundred percent (100%) solids with no shrinkage.

For all foundations of large Crushers and Mills, Bund Walls, Pump Plinths, and Workshop Machinery.

   20kg product number 9505-9550

NORDBAK® DEEP POUR GROUT is a 100% solids co-polymer grout that offers unique advantages in its combination of strength and economy.


It incorporates graded aggregate filler that greatly extends the volume of the mixed grout, with no significant loss of strength. Because of its semifluid consistency, it flows well under rails and sole plates.

DEEP POUR GROUT TDS   >>>>

DEEP POUR GROUT bonds securely to concrete and steel. It is a semifluid consistency allowing it to flow well under rails and sole plates and maintains critical alignments.

    DEEP POUR GROUT  is designed specifically for:

    • Pulverizers
    • Hammermills
    • Large Pumps
    • Bridge seals, rail approaches
    • Diesel or gas engines
    • Compressors
    • Generators
    • Outboard bearings
    • Punch presses
    • Jolt machines

    Typical physical properties of DEEP POUR GROUT

    • Compressive strength 131MPa
    • Equipment ready for use in 24 hours @ 21°C
    • Designed for pours as deep as 150mm
    • Unaffected by operating temperatures of up to 71°C
    • Bonds to various substrates

     x 1kg product number 9505-9936
    12kg product number 9505-9935

     

    NORDBAK® STEEL TROWEL MIX is a 100% solids epoxy resin system filled with steel powder. Once hardened it can be machined, drilled, tapped, or filed just like steel. Worn or corroded surfaces can be built up with STEEL TROWEL MIX  and then machined easily back to their original shape.
     

     

    Cures without heat or special devices, and has non-shrinking properties.

    STEEL TROWEL MIX TDS   >>>>

    STEEL TROWEL MIX can be used to:

    • Repair broken metal parts
    • As a surface coating to protect against abrasion
    • A tooling jig fixture or modeling material

    STEEL TROWEL MIX also bonds securely to:

    • Iron
    • Steel
    • Ceramic
    • Carbide
    • Concrete
    • Wood and chemical corrosion

    STEEL TROWEL MIX Technical Data:

     

    • Just like steel that can resist corrosion and chemical abrasion
    • Hardening time @ 21°C is 3 hours
    • Excellent material for fast, low-cost repairs to steel, iron, or other ferrous castings
    • Compressive strength 100MPa

    20kg product number 9505-9550A

    NORDBAK® ACID GROUT is a 100% solids co-polymer grout that offers unique advantages in its combination of strength and economy.

    It incorporates graded aggregate filler that greatly extends the volume of the mixed grout, with no significant loss of strength.

    • A semifluid consistency, allows ACID GROUT to flow under rails and sole plates.
    • ACID GROUT is suitable for dilute acid spill areas.

    ACID GROUT TDS   >>>>

    ACID GROUT typical uses include acid spill areas such as:

    • Large pumps
    • Bridge seals
    • Rail approaches
    • Structural columns

      ACID GROUT Technical Data

      • Compressive strength 131MPa
      • Operating time 24 hours @ 21°C
      • Easy to mix and use

      10kg product number 9505-9970

      NORDBAK® FASTSET GROUT is a 100% solids co-polymer grout that reduces maintenance costs sharply. The ideal grouting for new machinery or replacing old grout which has chipped or broken out.

      • Self-leveling because it is low in viscosity.
      • Sets up stronger than concrete.
      • Resists moisture and chemicals.
      • Will not shrink and adheres more securely than ordinary grouts.

      FASTSET GROUT TDS   >>>>

      FASTSET GROUT typical uses include:

      • Large pumps
      • Bridge seals
      • Rail approaches
      • Structural columns

      FASTSET GROUT Technical Data

      • Compressive strength 88MPa
      • Equipment ready for use in 24 hours @ 21°C
      • Vibration resistant… Binds steel to concrete
      • Fast setting

      Box of 24 product number 7459-9885B

      NORDBAK® STEEL STICKS are an epoxy compound filled with steel with unlimited uses for general repairs. Adheres to damp surfaces and cures under water. Use as putty or an adhesive. No measuring or mess, simply cut off what you need.

      Chemical and corrosion resistant. Can be used on a number of different types of materials.

      • Works like putty, sticks like glue
      • Mold to any shape
      • Fast – workable for 5 minutes and sets in 15 minutes
      • Drill, saw, tap, file or paint after material is cured

      STEEL STICK TDS   >>>>

       STEEL STICKS can be used to repair:

      • Ductwork
      • Fillets
      • Impellers
      • Anchor Bolts
      • Tooling Jigs
      • Chutes
      • Joints
      • Pump Casings
      • Moulds
      • Gear Casings
      • Tanks
      • Dies
      • Pipe Fittings

      Contact Us

      I'm interested in the following products:

      12 + 15 =

      wpChatIcon