Protective Coatings
A range of coatings for superb resistance to corrosion, wear, water, and acid environments. Can be used on concrete and steel as well as a wide variety of other substrates. Each kit is a two-part system (Resin & Hardener) which when mixed, creates a single product for one or more individual coating applications.
For the application to internal and external pipes, structural steel, tanks, scrubbers, thickeners, agitators, process vessels, and various floors.
Nordbak NORDCOAT 1 SPECIAL is ideally suited for:
- Food processing plants
- The manufacturing of food-type products
- General chemical resistance-immersion acids are available upon request
Nordbak NORDCOAT 1 SPECIAL can be used on:
- Concrete
- Steel
- Other substrates
NORDCOAT 1 SPECIAL is ideal for coating in low ambient temperatures. It is a two-part 100% solids co-polymer coating with a cure time of 24 hours.
6 x 1kg Black product number 8110-0200
6 x 1kg Blue product number 8110-0201
Heavy-duty Corrosion, Acid and Wear-resistant Coating.
NORDBAK® NORDCOAT 2 is a two-part 100% solids co-polymer coating giving maximum coating thickness.
NORDBAK® NORDCOAT 2 is an outstanding heavy-duty corrosion, acid, wear-resistant coating that can be used on steel and various other substrates.
Gives a maximum coating thickness in a one-coat application with a final cure time of 6 hours @ 20°C.
This products formulation ensures no shrinkage, resulting in wet film thickness being equal to dry film thickness.
5L product number 8110-0652
Excellent External Protective surface coating.
NORDBAK® NORDCOAT 6 is an outstanding corrosion and water-resistant coating that can be used on steel and a wide variety of other substrates. Two coats are recommended for most industrial applications.
Nordbak NORDCOAT 6 COLOURS is our most versatile protective coating.
- Easy to mix and apply
- Cures in 12 hours @ 20°C
- This product can be applied by brush, roller or spray
- Can be applied to steel or concrete
Nordbak NORDCOAT 6 is available in the following colours:
- Grey
- White
- Blue
- Brunswick Green
- Yellow
- Black
- Post Office Red
- Ral Orange
5L product number 8110-0620
Outstanding Corrosion, Acid and Water-resistant Coating.
NORDBAK® NORDCOAT 6 ACID can be used on structural steel, concrete, and a wide variety of other substrates where different levels of a variety of acids are present. It is a solvent-based co-polymer coating giving a maximum coating thickness of 100-125µm per coat.
Nordbak NORDCOAT 6 can be used on steel, concrete as well as a wide variety of other substrates.
- Two coats are recommended for most industrial applications
- May be applied with brush, roller or spray
- Curing time 12 hours @ 20°C
5L part number 8110-0650
Anti-corrosion and Water-resistant Coating that can be used on galvanized surfaces.
NORDBAK® NORDCOAT 6 GALV is a solvent-based co-polymer coating that gives a maximum coating thickness of 100µm – 125µm per coat.
Nordbak NORDCOAT 6 GALV can be used in the following areas:
- Workshops
- Vehicle parking areas
- Oil storage areas
- Storage areas
- Stores
- Food manufacturing areas
5L product number 8110-0600
Non-Conductive, Corrosion Resistant Surface Protective Coating.
NORDBAK® NORDCOAT 6 ANTI-STAT offers non-conductive surfaces in electrical environments a coated layer of protection against high-wearing corrosion.
5L product number 8110-0600
Non-Conductive, Corrosion Resistant Surface Protective Coating.
NORDBAK® NORDCOAT 6 ANTI-STAT offers non-conductive surfaces in electrical environments a coated layer of protection against high-wearing corrosion.
6 x 1kg part number 8110-0703
Acid and Chemical Environment Surface Protective Coating.
NORDBAK® NORDCOAT 7 ACID is an outstanding corrosion, acid and water-resistant coating that can be used on steel and a wide variety of other substrates. A two-part 100% solids co-polymer coating that gives a maximum coating thickness in a one-coat application.
General chemical resistance-immersion acids are available on request.
Nordbak NORDCOAT 7 ACID is designed specifically for:
- High chemical and acid resistance
- Easy to mix and apply
- Solvent-free formulation ensures no shrinkage
Nordbak NORDCOAT 7 ACID can be used in the following areas:
- Workshops
- Vehicle parking areas
- Oil storage areas
- Storage areas
- Stores
- Food manufacturing areas
6 x 1kg part number 7469-024
10kg part number 7469-022
Heavy-duty Corrosion and Acid-resistant Coating.
NORDBAK® PS 1 gives a smooth finish to surfaces whilst protecting them from general acids and higher levels of chlorine.
Nordbak PS1 is designed specifically for:
- General acids and higher levels of chlorine
- Gives a very hard smooth finish to swimming pools, dams, tanks, pipes, flooring, retaining walls and bund wall areas
- Gel time 3 hours @ 20°C
- One-coat application
- Available in Blue and white
10kg part number 7459-6153
A water-miscible co-polymer sealer that is absorbed into concrete surfaces.
NORDBAK® OIL SEAL is diluted with water into a watery liquid, to easily penetrate deep into the surface of the concrete, effectively sealing it from the ingress of oil and other general contaminants.
- NORDBAK® OIL SEAL gives a non-slip, washable finish
- Solvent-free formulation ensures safe working conditions
- Two-part co-polymer sealer
Nordbak OIL SEAL can be used in the following areas:
- Workshops
- Vehicle parking areas
- Oil storage areas
- Petrol stations outside areas
- Storage areas
- Stores
- Food manufacturing areas
Contact Us
Phone
Nordbak® polymer-based products are used successfully in general engineering, petrochemicals, building and civil construction, sugar mills, cement manufacture, and water reticulation.
Certificate Number: 8332
ISO 9001:2015
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.
STANDARD BACKING is tough, resilient and ideal for Gold, Copper and Low Strength Ores Cone Crushers (5 foot Crushers), Primary Gyratory Crushers, Rotating Mills, Pulverizes and other heavy reduction machinery.
STANDARD BACKING is tough, resilient and ideal for Gold, Copper and Low Strength Ores Cone Crushers (5 foot Crushers), Primary Gyratory Crushers, Rotating Mills, Pulverizes and other heavy reduction machinery.
NORDWEAR 5 has excellent wear properties together with resilience and impact strength. It has been designed specifically for Waterborne Slurries and Pneumatic Conveyancing.
